Device that gives constant tension to the skelpthat are wound on the Recoiler.
Slitter
Facility that loosens the coil while giving constant tension to the loaded coil.
Tension Unit
Device that gives constant tension to the skelpthat are wound on the Recoiler.
Recoiler
Device that gives constant tension to the skelpthat are wound on the Recoiler.
Information
CR slitter line adopted belt-bridle to protect the surface of galvanized coils. It is possible to attach protective film for the surface of color steel plates and galvanized coils. Max processing Speed is 200m per minute
Facility to load steel plates cut to a certain length.
Leveller
Facility to load steel plates cut to a certain length.
Rotary Shear
Equipment to produce the steel plate by continuously cutting the coil to a certain length.
Piler
일정한 길이로 절단 된 철판 (Sheet)을 적재하는 설비입니다.
Information
CR Shearing line's Max processing Speed is 80m per minute. It is installed the rotary shear which can cut sheets continuously, and the piler which makes possible to cut Max.5000mm long sheets. Attaching protective film is available as well.
Specifications
Material : CR, GI, EG, PO, COLOR, AL, Stainless
Max Coil weight : MAX 20TON
Thickness : 0.3mm~3.2mm
Line Speed : 80m/min
Width : 500mm~1,550mm
Producing ability : 13,000TON/Month
Coil : Out Φ600~Φ2,000, IN Φ508~610
Precision : ±0.2mm(Width deviation)
SHEAR LINE (COLD SSC) Image
MINI SHEAR LINE (COLD SSC)
Uncoiler
장입된 코일에 일정한 장력(Tension)을 주면서 코일을 풀어주는 설비입니다.
Leveller
코일을 반복굽힘을 통해 소재의 평탄을 잡으며 동시에 다음 공정으로 투입(Feeding)하는 설비입니다.
Rotary Shear
코일을 일정한 길이로 연속절단하여 철판으로 생산하는 설비입니다.
Piler
장입된 코일에 일정한 장력(Tension)을 주면서 코일을 풀어주는 설비입니다.
Information
Because of its rotary knife, it is excellent in the flatness and diagonal precision. To meet every customers needs, it can process Minimum size sheets. It is possible to get cost reduction and quality satisfaction by minimizing loss of coils.