Facility that loosens the coil while giving constant tension to the loaded coil.
Slitter
Device that gives constant tension to the skelp that are wound on the recoiler..
Tension Unit
Device that gives constant tension to the skelp that are wound on the recoiler.
Recoiler
Device that gives constant tension to the skelp that are wound on the recoiler..
Information
CR Slitter Line can process coils into two inner diameters, 508, 610 mm.
Belt Bridle is installed to protect the surface of galavanized coils. Max processing Speed is 250m per minute
Specifications
Material : CR, GA, GI, PO, HGI, AL
Max Coil weight : 20TON
thickness : Out Φ1,000~Φ2,000, Width 600mm~1,650mm
Thick : 0.4mm~3.2mm
Coil : Out Φ508~Φ610, Size 32mm~1,650mm
Line Speed : MAX 250m/min
Precision : ±0.1mm(Width deviation)
producing ability : 12,000TON/month
SLITTER LINE (Cold SSC) Image
SLITTER LINE (HOT SSC)
Uncoiler
장입된 코일에 일정한 장력(Tension)을 주면서 코일을 풀어주는 설비입니다.
Slitter
소재를 일정한 폭으로 절단하는 하는 설비입니다.
ROBOT
컴퓨터에 입력된 슬리터 세팅값에 따라 자동으로 로봇이 나이프(Knife), 스페이서(Spacer), 라바(rubber)를 세팅해주는 설비 입니다.
Recoiler
슬리팅 된 스켈프(Skelp)에 일정한 장력(Tension)을 주면서 감아주는 설비입니다.
Information
HR Slitter Line which has Auto-Robots for setting and changing slitter knives automatically, is for processing Thick and High-tensile strength steel coils. The Auto-Robots have improved the precision and productivity of the line.
Specifications
Productsr : High tension, HR, PO, HOT GI
Max Coil weight : 30TON
Material : Out Φ1,000~Φ2,200, Width 800mm~1,860mm
Thick : 1.6mm~13.0mm
Product :Out Φ508~Φ610, Size 51mm (Thick 2.3mm)
Line Speed : MAX 60m/120m/min
Precision : ±0.1mm(Width deviation)
producing ability : 14,000TON/Month
Remarks :Knife is automatically set by the robot, High Tension Slitting (100 Kg)
SLITTER LINE (HOT SSC) IMAGE
SHEAR LINE NO.1 (HOT SSC)
Uncoiler
Facility that loosens the coil while giving constant tension to the loaded coil.
Gang Slitter
Facility that loosens the coil while giving constant tension to the loaded coil.
Finish Leveller
파일러(Piler) 위에 위치하며, 길이가 긴 철판(Sheet)을 자석에 붙여 이송 후 파일러에 낙하, 적재하는 설비입니다.
Rotary Shear
코일을 일정한 길이로 연속절단하여 철판으로 생산하는 설비입니다.
Magnet Piler
파일러(Piler) 위에 위치하며, 길이가 긴 철판(Sheet)을 자석에 붙여 이송 후 파일러에 낙하, 적재하는 설비입니다.
Information
12.7T Shear line has 3 levellers (Rough, Heavy, Light) for extending of processing range. Its Maximum width of processing is 1850mm. It has gang slitter, so it is possible to process slitting and shearing at the same time.
Specifications
Products : HR
Max Coil weight : 30TON
Material : Out Φ1,200~Φ2,200, In Φ508mm, Φ610mm, Φ762mm, Φ860mm
Thick : 1.6mm~12.7mm
Width : 600mm~1,850mme
Length : 1,000mm~13,500mm
Line Speed : MAX 30m/60m/min
Precision : ±0.5mm(Width deviation)
producing ability : 12,000TON/month
SLITTER LINE NO.1 (HOT SSC) IMAGE
SHEAR LINE NO.2 (HOT SSC)
Uncoiler
facility to load steel plates cut to a certain length.
Side Trimmer
facility to load steel plates cut to a certain length.
Leveller
facility to continuously cut both edges
Rotary Shear
Equipment to produce the steel plate by continuously cutting the coil to a certain length
Piler
Equipment to produce the steel plate by continuously cutting the coil to a certain length
Information
3.2T Shear line can shear sheets continuously without stopping by rotary shear. It is possible to make flat sheets ultra-precisely.
Specfication
Products : HR
Maximum coil weight : 30TON
Material : Out Φ800~Φ2,000, In Φ508mm, Φ610mm, Φ762mm, Φ860mm